-40%

Williams System 11 Pinball Soundboard tester v1.3 PCB v1 D-11581,D-11297,C-11029

$ 12.13

Availability: 100 in stock
  • Brand: Williams
  • Condition: New
  • All returns accepted: ReturnsNotAccepted

    Description

    This PCB is used to test a Williams Pinball soundboard. It can be used on a bench or in the pinball machine. A matching MPU with EPROM's is not required. On a bench, 12+V,12-V,5+V, speaker, volume switch, is required. Within the machine, detach the 20pin IDC ribbon cable and connect this directly to the sound board.
    This is Version 1.3 of the tester. It performs the same tests as Version 1 and 1.2 but does not require a cable. It has an
    additional 4.7Kohm pull-up resistor that can be connected to 5VDC. This guarantees that the signal is held at logic high until the PIA grounds the signal. This allows to test soundboards that do not have the SRC installed natively like the
    D-11297 (Like High Speed) and C-11029 (Like Pinbot).
    Great to complete your system 11 MPU test fixture.
    Also TESTS Arcade soundboard. Arch Rivals test in Youtube video.
    Free Shipping!
    Includes instructions.
    The alligator clip wires for 5V and Ground that connect to the terminals are NOT included.
    This was tested on a
    D-11581, C-11297, and C-11029 soundboard. It may also work with other soundboards that connect with a 20 pin IDC cable.
    Version 1.3 tester youtube videos:
    Willams pinball soundboard Tester v1.3 bench test Whirlwind - YouTube
    Williams pinball soundboard Tester v1.3 used in High Speed game - YouTube
    Bench with version 1 of tester, same can be done with version 1.3 without cable.
    Williams System 11 Pinball Soundboard Tester - YouTube
    Version 1.2 Within Game, same can be done with version 1.3 without cable.
    Williams System 11 Pinball Soundboard Tester v1.2 Pinbot D-11297 - YouTube
    Williams System 11 Pinball Soundboard Tester v1.2 Whirlwind D-11581 - YouTube
    Williams System 11 Soundboard Tester v1.2 High Speed Pinball C-11029 - YouTube
    Arcade Arch Rivals ARCADE on a bench. Same can be done with version 1.3 without cable.
    Arcade Arch Rivals Soundboard tester bench - YouTube
    Arch Rivals Arcade short sound board tester D11581 - YouTube
    **
    This PCB is professionally soldered.
    The D-11581 can usually be found in the follow machines:
    Atlantis, Bad Cats, Banzai Run, Big Guns, Black Knight 2000, Bugs Bunny's Birthday Ball, Cyclone, Diner, Dr. Dude, Earthshaker, Elvira and the Party Monsters, F-14 Tomcat, Fire!, Game Show, Millionaire, Mousin' Around!, Pin*Bot, Police Force, Pool Sharks, Radical!, Riverboat Gambler, Rollergames, Swords of Fury, Taxi, Transporter the Rescue, Whirlwind Arch Rivals arcade