TCS M4-KAC ~ DCC Wired Decoder With Keep Alive Plug ~ 1429

Description

Iron Planet Hobbies
TCS M4-KAC DCC Wired Decoder With Keep Alive Plug 1429
The M4 is a small form factor hard-wire decoder with 2 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited.
The M4-KAC includes a factory-installed 2-Pin Mini Connector with Blue and Black & White wires to use when connecting Keep Alive® devices with the same 2-Pin Mini Connector. Keep Alive® devices with the connector are designated as “KA(n)-C”
Also see the KAM4, which is a M-series decoder with on-board Keep Alive®. The M4-KAC can be used in situations where the Keep Alive® device must be mounted elsewhere, and needs to be disconnected occasionally.
Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.
DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.
Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
Airwire™ Compatible:
Fully compatible with Airwire™ operation.
User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Interface Type: Hard-Wire
Dimensions (L x W x H): 0.587″ x 0.365″ x 0.135″ or 14.91mm x 9.27mm x 3.43mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 100 mA
12V Outputs: 4
We are an authorized TCS dealer
.
Thanks For Looking!