10003 292 CHEVY PS P/S POWER STEERING BRACKET use with 1963-74 TYPE WATER PUMP

Description

PLEASE READ & UNDERSTAND THE ENTIRE DESCRIPTION PRIOR TO PURCHASE!
FOR MORE INFORMATION, PLEASE GO TO OUR OFFICIAL DAVIS SPEED EQUIPMENT WEBSITE!
WWW.DAVISSPEEDEQUIPMENT.COM
NEW POWER STEERING BRACKET FOR 292 CHEVY USING THE 1963-64 OR 1965-74 STYLE WATER PUMP.
BRACKET INCLUDES HARDWARE AND INSTRUCTIONS.
BRACKETS ARE PLAIN STEEL AND COME WITH HARDWARE & INSTRUCTIONS. THEY ARE IN
"READY TO PAINT" CONDITION. JUST WIPE DOWN WITH SOLVENT AND PAINT.
REQUIREMENTS FOR USE:
1) 292 ENGINE USING 1963-74 WATER PUMP.
2) SAGINAW POWER STEERING PUMP. (SEE NOTES BELOW).
3) APPROPRIATE UPPER ALTERNATOR BRACKET (SEE PICS).
4) 2 OR 3 GROOVE BALANCER & WATER PUMP PULLEY. (SEE NOTES BELOW).
WHAT THIS IS
NOT
FOR:
1) 292 ENGINES USING 1975-89 STYLE 292 WATER PUMPS. PLEASE SEE 10004 INSTEAD.
2)
IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, THEN THIS MIGHT BE TOO WIDE. SEE DIMENSIONAL DRAWING.
3) TRYING TO RUN BOTH PS & ALT ON SAME SINGLE BELT. NOT ENOUGH BELT WRAP ON ALT. (SEE NOTES BELOW).
4) NOT FOR USE ON LOW DECK (153 194 215 230 250) ENGINES. SEE 10002 INSTEAD.
5) DOES NOT WORK WITH INTEGRAL HEAD.
NOTES OF INTEREST:
PUMP CAN BE ADJUSTED FRONT TO BACK TO ALLOW FOR DIFFERENT PULLEY ARRANGEMENTS.
WORKS WITH STOCK & AFTERMARKET EXHAUST MANIFOLDS & HEADERS.
WORKS WITH BOTH 5-1/2" & 7" WATER PUMP PULLEY SIZES.
IF YOU DO NOT HAVE A 2 GROOVE WATER PUMP PULLEY AND DO NOT INTEND
TO CHANGE TO 2 GROOVES, THEN PLEASE SEE PART 10089 INSTEAD.
IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND INTEND TO ALSO USE AC,
PLEASE SEE 10089 INSTEAD. NEED THE AC BRACKET AS WELL? THEN SEE 10090 OR 10091.
TRYING TO RUN THIS AND YOUR ALTERNATOR OFF ONE BELT DOES NOT USUALLY WORK
BECAUSE YOU WON'T HAVE ENOUGH WRAP ON THE ALTERNATOR PULLEY. USE SEPARATE
BELTS AS SHOWN IN PICTURES.
WILL NOT WORK WITH THE LARGE UGLY UPPER ALTERNATOR BRACKET THAT BOLTS
TO THE HEAD. YOU NEED TO USE THE EARLIER "STRAP" TYPE, OR BUY ONE OF OUR
ALTERNATOR BRACKETS, PART 10000 OR 10022 OR 10022AA OR 10094.
WORKS WITH 1X4, 2X1 & 3X1 INTAKES, HOWEVER CARB STYLE, LINKAGE & FUEL LINES MAY BE CHALLENGING ON 3X1 SETUPS.
PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN'T RELEVANT. BOTH "MILK JUG" AND "A-FRAME" STYLES WORK FINE.
ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.
All designs are the property of Davis Speed Equipment, LLC
See my other listings for:
More 194-292 brackets.
216-261 brackets available.
GMC brackets available.
WANT TO SEE MY OTHER PARTS?
1)  THEN GO TO THE TOP OF THIS PAGE.
2)  LOOK UNDER MY USER I.D.
3) CLICK ON "VISIT STORE"
If you are wondering what to do for a 2 groove water pump pulley, if you have the 2 or 3 groove balancer with the wide space at the back,
then a 2 groove water pump pulley from a small block V8 will work. 1955-68 for small fan bolt pattern, 1969-up for large fan bolt pattern.